Nice !

I would go with wood filament.

« Certains ont décidé d’organiser un fest-noz », se rassure Soaz Plantec-Rousic, de la direction du second degré de Diwan.

Voilà où va l’argent ! Ils ont une direction spécifique pour faire des blagues ironiques.

Also, I think that mirrors the marketshare of devices used to browse the Internet. More and more phones, less and less computers.

Oh crap. You are right. Now I feel angry if this is fake data.

It’s way more exhaustive actually ! https://books.google.fr/books?id=7mWeBQAAQBAJ&pg=PA97&hl=fr&source=gbs_selected_pages&cad=1#v=onepage&q&f=false

I was maintaining a custom autoexec.bat just for TIE Fighter.

From my point of view : it has a hudge ecosystem with tons of robust libraries. This does not make it perfect, but for an industrial point of view, you don’t look for new shiny clean things. (My point of view is 15 years old yet…)

I wanted to know the date of this comic. It was issued in Eightball #5, February 1991.

24 (TV series) is like this if I remember well. The daughter would have had a cellphone now.

J’ai la dernière édition française du “Guide du Routard Galactique”. Une préface informe que les noms ont été changés pour coller à la version sortie au cinéma (H2G2).

Bon, pour le coup ça reprend les noms originaux au lieu de l’ancienne traduction des noms.
Arthur Dent (Arthur Accroc dans la première VF) ; Ford Prefect (Ford Escort dans la première VF) ; Zaphod Beeblebrox (Zappy Bibicy)

I just measured it and the overhang behind is half the bed and half the infamous cable. You need around 60cm between the front feet and the wall behind, for the cable not to be torn when the bed is all the way to the back.

The bed goes back and forth. On the back, you need the place since there is the infamous cable that should not be torn. On the front, the bed can go over the void. There is no need for a 70 cm large table, maybe 50cm with overhang.

It’s a mess. I have the A1 with AMS and it takes way more space than I wanted. The coreX with AMS are way more compact.

Edit.
Wide 80cm (with the poop chute on the left and the AMS on the right) Depth 70cm (with all the cables and the bed going back and forth) Height 60cm with the top roll

Ils font une reprise en anglais cette année. J’ai dû montrer le clip original à ma fille pour sa culture personnelle. Le clip où ils courent avec une chemise déboutonnée et où ils dansent sur les ailes d’un avion de ligne. Ça a fait marrer ma fille.

Il y a aussi une reprise de shakira. Et -horreur- une reprise de Simon and Garfunkel dans laquel le chanteur beugle comme un âne. C’est sensé être une ballade acoustique.

I would like to get one for our club but I can’t understand the wide variety of prices. $150 ? $500 ? $2000 ? $10000 ? $75000!! ? What’s the cheapest that is not a pain to use ?

Sexy

What slicer is it ? I will check if it is possible to set no purge at all in BambuStudio - since I have an AMS lite.

It looks feasible with a purge multiplier set to 0. https://forum.bambulab.com/t/setting-an-unbeatable-record-no-flush-at-all/51052/4

I say to people : if you’re interested in 3D printing, you need two hobbies. 3D printing and anything else. The second hobby can be repairing things, a sport (spearfishing for me), board games, electronics, etc.

I started with a 100€ very small 3D printer for years (Tina2) and that was so worth it. Now I have a Bambulab with AMS and it’s night and day.

I spearfish and my phone gives me random pictures of dead fishes. And cooked fishes.

A friend has been challenged when trying to bring a nordic cheese (from Norway to France). The TSA equivalent said that it could be liquid if hot enough. Yeah… glasses too.