I do try to go with Matter/Thread as much as possible. I do have old, in-wall switches that are on Z-Wave.
I recommend using bulbs where you want the option of colors, and switches where you don’t. To control the color bulbs from the wall, you need a scene controller, which is a bit expensive and I haven’t found a good one yet. It’s not as simple as a switch.
I did recently pick up a Matter/Thread Reolink doorbell for $100. It was pretty easy to install, and works well with Home Assistant. The TV controls are just a Chromecast, but of course the dedicated remote works better. Still nice for turning the TV off an on.
I also use an old phone as a wall panel, set up with Home Assistant app pinned and set to Kiosk mode. HA does often become unpinned, so it’s not perfect.
I’m just starting to get into Thread. Unfortunately for me, I’m militant to a fault about my stuff being really as Open Source as possible (and I’m also pretty cheap, NGL), so my “Thread Border Router” is a dev board and some instructions, not a finished product, LOL.
(I haven’t set it up yet, so wish me luck. I also need to design and 3D print a case, etc…)
Unfortunately, those are “temporarily unavailable.” The only place I’ve been able to find it is a third-party seller link on Amazon scalping it for $98.
I do try to go with Matter/Thread as much as possible. I do have old, in-wall switches that are on Z-Wave.
I recommend using bulbs where you want the option of colors, and switches where you don’t. To control the color bulbs from the wall, you need a scene controller, which is a bit expensive and I haven’t found a good one yet. It’s not as simple as a switch.
I did recently pick up a Matter/Thread Reolink doorbell for $100. It was pretty easy to install, and works well with Home Assistant. The TV controls are just a Chromecast, but of course the dedicated remote works better. Still nice for turning the TV off an on.
I also use an old phone as a wall panel, set up with Home Assistant app pinned and set to Kiosk mode. HA does often become unpinned, so it’s not perfect.
I’m just starting to get into Thread. Unfortunately for me, I’m militant to a fault about my stuff being really as Open Source as possible (and I’m also pretty cheap, NGL), so my “Thread Border Router” is a dev board and some instructions, not a finished product, LOL.
(I haven’t set it up yet, so wish me luck. I also need to design and 3D print a case, etc…)
I’m using a Skyconnect, which might be open? It’s made by the HA guys. (In addition to a Google hub v2.)
Unfortunately, those are “temporarily unavailable.” The only place I’ve been able to find it is a third-party seller link on Amazon scalping it for $98.
https://ameridroid.com/products/skyconnect
Nice, $35 is way better than $98.
I’m still gonna try tinkering with my $10 ESP board for now, but I’ll keep that in mind if decide I’d prefer something that “just works.”