akilou@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 14 days agoHow do I clean this mess?sh.itjust.worksimagemessage-square28linkfedilinkarrow-up180arrow-down12
arrow-up178arrow-down1imageHow do I clean this mess?sh.itjust.worksakilou@sh.itjust.works to 3DPrinting@lemmy.worldEnglish · 14 days agomessage-square28linkfedilink
minus-squarenomad@infosec.publinkfedilinkEnglisharrow-up5·edit-214 days agoUse a knife and carefully scrape off what you can while cold. Heat to printing temp and wipe off what you can. Cool down and clean with acetone if need be. Edit: do this only with metal pieces. Disassemble head if need be.
Use a knife and carefully scrape off what you can while cold. Heat to printing temp and wipe off what you can. Cool down and clean with acetone if need be. Edit: do this only with metal pieces. Disassemble head if need be.