Title pretty much tells you all you need to know about my situation. In a turn of events tonight I’ve been gifted a used but working EVGA 3090 card to replace my seven year old 1070.

My current system hardware specs are:

CPU: AMD Ryzen 9 5900X 12-Core (upgraded from Ryzen 5 last year)

GPU: MSI 1070

MoBo: MSI MAG B550 TOMAHAWK

PSU - Corsair CX-550 550 Watt

x4 8GB Installed Memory

I also have a 2tb SSD drive with my OS and games installed, and 4 8tb HDD for media.

My main concern is with needing to replace my MoBo with a x3 PCi board and worries about my PSU not being powerful enough. I’m not particularly worried about my tower is a Phanteks Enthoo Pro PH-ES614PC_BK.

Thanks in advance!

  • CrazyLikeGollum@lemmy.worldEnglish
    5·
    11 months ago

    The motherboard is fine, unless you want some of the overclocking features there’s really no need to go above the b550 chipset for a Ryzen 5xxxx series.

    That CPU will be excellent paired with a 3090.

    You will need more RAM. At least 16GB in a dual channel kit, though 32GB would be better. Going beyond that would be kind of pointless at this point.

    The PSU you would definitely need to upgrade. You’d need a minimum of 750W, but going with a 1000W PSU would give you some headroom for future upgrades for a pretty minimal price increase.

    • mommykink@lemmy.worldOP
      3·
      11 months ago

      Glad to see that the MoBo and CPU should pair without fault for the 3090. Truthfully I haven’t refreshed myself on hardware jargon since I built my PC around 2018.

      you will need more RAM

      That was a complete typo on my part, I meant to put x4 8GB for 32GB total.

      PSU was expected, upgrading to a GPU that maxes 350W on its own. Will probably be looking into a 1000W unit on your recommendation, just for future proofing

      • CrazyLikeGollum@lemmy.worldEnglish
        2·
        11 months ago

        As an additional note, if you’re comfortable doing so, I’d recommend going into the BIOS and undervolting the CPU down to 1.2 or 1.3 volts.

        A common issue with the higher end Ryzen 5xxx CPUs is that they run a bit hot which prevents them from boosting clock speeds as high for as long as they’re able.

        My last build very similar to yours, (3090, 5900x, 32GB RAM) and I was able to shave almost 10C off of the CPU temps by setting a CPU voltage offset of -0.15 volts.