BrikoX@lemmy.zipM to Technology@lemmy.zipEnglish · 9 months agoRaspberry Pi is preparing for an IPO in London for likely more than $500Marstechnica.comexternal-linkmessage-square15fedilinkarrow-up121arrow-down10cross-posted to: hardware@lemmit.onlinetechnology@lemmy.world
arrow-up121arrow-down1external-linkRaspberry Pi is preparing for an IPO in London for likely more than $500Marstechnica.comBrikoX@lemmy.zipM to Technology@lemmy.zipEnglish · 9 months agomessage-square15fedilinkcross-posted to: hardware@lemmit.onlinetechnology@lemmy.world
minus-squareBrikoX@lemmy.zipOPMlinkfedilinkEnglisharrow-up2·9 months agoThere are hundreds of different alternatives varying in cost, power, and configuration. Just to name a few: Arduino, ODROID, Orange Pi.
minus-squareYou999@sh.itjust.workslinkfedilinkEnglisharrow-up2·9 months agoAre you using a RPI for it’s GPIO pins or are you just using it as a small computer?
minus-squarefjordbasa@lemmy.worldlinkfedilinkEnglisharrow-up1·9 months agoAlternatives as far as efficiency and modularity, for sure, but I’m not sure that any other boards have the same level of documentation and support.
minus-squareAggressivelyPassive@feddit.delinkfedilinkEnglisharrow-up3·9 months agoUsed thin clients are a great alternative, if you don’t need the SBC form factor or gpio.
deleted by creator
There are hundreds of different alternatives varying in cost, power, and configuration. Just to name a few: Arduino, ODROID, Orange Pi.
Are you using a RPI for it’s GPIO pins or are you just using it as a small computer?
deleted by creator
Alternatives as far as efficiency and modularity, for sure, but I’m not sure that any other boards have the same level of documentation and support.
Used thin clients are a great alternative, if you don’t need the SBC form factor or gpio.