• bisby@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    10 months ago

    Same. The USB port struggles to retain the cable sometimes, but this phone has kept me happy for a very long time.

    I wonder what it would take to just repair the USB port.

    • xvlc@feddit.de
      link
      fedilink
      English
      arrow-up
      11
      ·
      10 months ago

      For my phone (almost 7 years old), a thin needle to scrape out all the dust is sufficient. Pressurized air also helps.

      • khannie@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        10 months ago

        Yeah was just about to say the same. I had a OnePlus 5 where the cable wasn’t staying in because pocket lint had built up inside in then gotten compressed by me putting in the charger cable. Thin needle and a torch sorted it right out.

      • bisby@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        edit-2
        10 months ago

        Mine doesn’t seem to have much dust in it (I don’t usually keep it in a pocket) and it seems like the cable seats all the way, but more of a situation where the metal housing is bent so doesn’t grip the cable properly. 🤷

        Edit: well ill be… I got a needle in there. Very little came out. Cable seats in what looks like the exact same depth as before, but now it holds the cable better. Mind blown. Apparently 0.1mm worth of dirt is all it takes

        • SheeEttin@programming.dev
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          That can also happen if the cable is worn out. They’re designed to wear faster than the port, since that’s much harder to replace.

      • Fermion@mander.xyz
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        This is one of the main reasons I use a wireless charger for nightly charging. The lint doesn’t get packed in to a dense layer if you aren’t plugging cables in all the time. My other reason is that I’m a clutz and snag dangling cables when reaching for stuff.

    • SolidGrue@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      My port also got wallered out but it’s a very easy swap. 2 case screws, pop off the back, undo 2 more screws to remove the USB/audio jack assrmbly and swap in the new one. No glue, no kamikaze springs, no muss, no fuss.

      Its a $5(ish) part plus shipping from iFixIt, and took me 20 minutes. I replaced the battery too, sonce I was already in there with the back off. Also an easy swap.