Its an old LG, but given the recent light on the lengths they’ll go to spy on us, I figured this guy was better off without any ability to even connect wirelessly. Don’t know if the Ethernet still works but I plan on keeping my TVs as dumb as possible, HDMI only.

If you’re wondering how to open lg TVs you just have to remove all the screws then start pulling open at the bottom and open the clips going up. With the TV face down on a soft surface just keep pulling on the back case from the bottom, it’ll take some effort to pop open. The top edge folds open more like a hidge than clips.

  • ChunkMcHorkle@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    16 hours ago

    OP, how did you isolate and identify the chip from the rest of it: did you have a service manual, or just relevant experience that told you where to look? Also, was it hardwired, or was it something you could just detach?

    I am definitely storing this away for future use, hence the questions. Right now I’ve got very old totally non-networked, non-exploitable sets, but I’m sure that will change some day. Hook a brother up so I know what to look for when I have to buy something new.

    • hereiamagain@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      6 hours ago

      Heads up, modern TV’s likely use an SoC (System on a Chip) which combine many if not all of the required parts for a “computer”, usually including Bluetooth and Wi-Fi.

      It will likely not be this easy with modern TV’s.

      Though clipping/shorting the antenna lines may still be an option. Or if it’s a PCB based antenna, cutting the traces.

    • Hond@piefed.social
      link
      fedilink
      English
      arrow-up
      9
      ·
      14 hours ago

      I did the same thing and made a post about it with pictures. https://piefed.social/post/2362076

      I looked up pictures of wifi modules for my model beforehand and found a few replacement parts. So i had a general idea what to look for. Theres also a chance somebody opened the exact same tv modell and documented it on youtube.

      And yeah its a simple internal flatwire connector. If you ever want bt or wifi again you only need to reseat the cable again. Cant speak for every TV ofcourse.