• money_loo@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Holy shit this explains so much!

    Our dishwasher in a 2010s era home finally died, and when we pulled it out to install a new one there were these off center holes behind it!

    Like, wtf? Why did you need three holes for one cord?

    I guess during construction different people thought it wise to drill different holes for different things?

      • Dozzi92@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        This is interesting. I did my garage from the studs out. Using conduit to run electrical never even occurred to me. I think it would be a real bitch to drill holes through each stud level enough to push a rigid conduit through. Maybe there are some flexible conduits, but now you’re taking a 1/2" hole and making it a full inch, in a 2*4, which is nominally 1 and 3/4". But now I’m thinking they did it with Bx, and maybe I’m not fully versed on why. I know the shielding acted as a ground as well.

        I’m rambling. I think there’s some rationale that’s not just capitalism=bad. Code is okay with running straight Romex through studs, so long as you staple and whatnot. Maybe it’d be above code to use conduit, but I think it’s just a lot of extra work for not very much payoff. So yeah, capitalism=bad, I guess.

          • Dozzi92@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            1 year ago

            So during my garage retrofit, I did run, in addition to 100amps for a panel, a separate conduit with two Cat6s. In the event of upgrades in tech, I can easily pull that through and replace with Cat7 or whatever. I won’t, but I could. It’s about 90ft from the house to the garage.

      • droans@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Laziness more or less.

        It’s easier and cheaper to just run one wire. Most people don’t want more than a couple different port locations so why bother?

        And you’re not installing the other two items so it’s not your responsibility. You’re also not going to get paid more for doing the extra work. Even if the homeowner was the one paying you, most aren’t willing to pay a bit extra just so it’s easier on the next guy.