Mine is 186GiB. I have about 100 movies and 3 TV series on a two hard disks (one for backup). I don’t know if that is small or large.

How big is your collection?

    • vulgarcynic@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      5
      ·
      5 months ago

      The majority of my stack as well as vehicles run off renewables / solar. So it’s hard to tell. May seem like some massive library but it has been accumulated over 25 or so years and is composed of a shit ton of physical rips from a pretty extensive library of everything from VHS and vinyl to uhd…

        • vulgarcynic@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          2
          ·
          5 months ago

          Overall it’s (currently) a couple jbods plugged in to a NUC. Total draw is at 81W currently. That’s based off of a quick remote check on my UPS.

          That’s a Ubiquiti Dream Machine Pro, Modem, Ubiquiti U7 Pro, 2 - 6 disc jbods running Seagate exos 20tb, and the NUC.

          There’s a secondary drive array but it only powers on once a week for a few hours to run backups/differentials. Even under that load I don’t really spike above 100W.

          Compared to the draw my old full rack with a couple loaded up r210’s has, this is incredibly efficient.

          • ReveredOxygen@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            5 months ago

            you’re just using jbod? with that many disks, aren’t you worried about them failing? or do you just redownload it if that happens

            • vulgarcynic@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              ·
              5 months ago

              I have a full mirror. If both arrays fail, I figure I have bigger problems and redownlod would be low on the list.

          • antipiratgruppen@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            5 months ago

            Which JBODs do you use for your 20TB Seagate Exos, and would you recommend?

            I’m looking for recommendations for a solution that will work for 3 × 22TB white-label Seagate Exos, but it seems to me that only very few of the various JBOD enclosures available online are actually good products worth buying, but it isn’t always clear to me if they even support 22TB drives…

          • onlinepersona@programming.dev
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            10
            ·
            5 months ago

            That is incredibly efficient! Thanks for the info 🙂 I’ve wanted to be hoarder, but never thought I could afford it in the long run.

            It must be pretty loud though, no? One would need a dedicated room for it, I image.

            Anti Commercial-AI license

            • vulgarcynic@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              3
              ·
              5 months ago

              I keep everything in a 10u rack in my garage so it doesn’t bother us much. That said, when it was in my office being configured, it was quieter than my desktop running a 5900x and 3080.

              By design, NUC’s are super quiet and the jbods I’m using are cooled with 2 140mm fans running at about 50% most of the time.

              Worth noting, I’ve been a metal fan and musician most of my life so my sensitivity isn’t very high compared to a lot of others.